GM Tech-2 PRO Kit (CANdi & TIS)
Part No.: D 009
The TECH 2 DIAGNOSTIC TOOL is for VAUXHALL, OPEL, SAAB, ISUZU and GM VEHICLES.
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010
Features:
- Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
- Support for on-board diagnostics on all GM systems 1992 thru current year.
- Removable hardware modules provide insurance against scan tool obsolescence.
- Large, easy-to-read backlit screen.
- RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
- Ability to capture stored DTC, Freeze Frame, and Failure Record for later review.
- Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
Dimensions |
12″×6″×2″ |
Microprocessor |
32 bit, 16 MHz |
Memory |
32 MB flash type II PCMCIA. Type III slot available for future expansion. |
Communications |
Integral RS232 communication port. |
Screen |
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once |
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
- Tech-2 Flash Tester
- 32 MB PCMCIA Card with GM OE Applications
- CAN diagnostic interface module(CANdi)
- GM aftermarket Expertec TIS software on CD-ROM disks
- Hardware lock to open SPS programming in TIS 2000
- RS232 cable and user's manual.
- Data/Sensor/Trouble Code Manual
- DLC Cable, DLC Loopback Adapter
- 12V Cigarette Lighter Power Cable
- SAE 16/19 Adapter
- NAO 12/19 Adapter
- Battery Power Cable
- Storage Case
- Tech-2 Flash Registration Card
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
- ’05 Buick Allure (3.6L)
- ’05 Buick LaCrosse (3.6L)
- ’05 Buick Rainier (5.3L)
- ’04-’05 Buick Rendezvous (3.6L)
- ’04-’05 Cadillac CTS (3.6L)
- ’04-’05 Cadillac SRX (3.6L / 4.6L)
- ’04-’05 Cadillac XLR (4.6L)
- ’05 Cadillac STS (3.6L / 4.6L)
- ’05 Chevrolet Cobalt (2.2L)
- ’05 Chevrolet Corvette (6.0L)
|
- ’05 Chevrolet Equinox (3.4L)
- ’05 Chevrolet TrailBlazer (5.3L)
- ’05 Chevrolet SSR (6.0L)
- ’04 Chevrolet Malibu (Body/Chassis only)
- ’05 Chevrolet Malibu (3.5L)
- ’05 GMC Envoy (5.3L)
- ’05 Pontiac G6 (3.5L)
- ’05 Pontiac GTO (6.0L)
- ’05 Pontiac Pursuit (2.2L)
- ’03-’05 Saturn ION (2.2L)
|
 |
If you have any question or want to place order, please contact us and remark the name of product. |
|
|
|
|
