VAG CAN Commander 8.6

Part No.: C 013

Latest update:

Update on 2011-5-20

1. added Bora 1.4T NEC24C32 dashboard;

2. support calibration for Q7, A6l after 2009 odometer;

Update on 2011-5-13

1. Added log algorithm of foreign NE24C32 with key. Via OBDII (OBD2) interface it could modify Kilometer, make dealer's key, Read/write EEPROM, back up FLASH;

2. Newer update supports NEC 24c64; Via OBDII (OBD2) interface it could modify KM, make dealer's key, Read/write EEPROM, back up FLASH;

3. Newer update supports CDC32XX; Via OBDII (OBD2) interface it could modify KM, make dealer's key, Read/write EEPROM, backup FLASH; resolving the problem that some of Jetta 2009 are not supported

Update on 2011-5-6

1. Passat B6 (Magotan) extracts password from med17.5.x engine, also could make key (need update the firmware).

2. Modify the BUG function to make TA special chip.

3. Add new function to make TP chip.

Update on 2011-4-30

1. Newer updated version supports NEC 24c32 to modify odometer, make dealer’s key, read/write EPPROM and make FALSH backup via OBDII;

2. It also supports GOLF6 MM7(9S12) modify odometer, make dealer’s key, read/write EPPROM and make FALSH backup via OBDII;

3. It adds the pre-programmed function of TA special chip, which could pre-grogram the chip 48 to TA2,TA3,TA4,TA5 directly;

VAG IMMO PLUS

1. Support modify Kilometer, make key, read / write EEPROM and read/ write FLASH for CDC32XX 2006;

(Has more HASH Keyes, more algorithms, support more vehicles than VAG commander. If you have some dashboard which it does not support, please get the FLASH and EPPROM data to us via XPROG to help us updating in next generation.);

2. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for NEC23C32 2008;

3. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for NEC23C64 2010;

4. Support modify Kilometer, make key, read / write EPPROM and read / write FLASH for Golf 6 MM7;

5. Support make TP series chips: tp22, tp23, tp24, tp25;

6. Support make TA series chips: ta2, ta3, ta4, ta5;

Product Description 
ABRITES Commander for VAG is a Windows PC based diagnostic software for the vehicles from VAG. With the help of this tool you can perform operations with vehicles from the VAG group, which are in most cases unsupported from the producer diagnostic testers. The ABRITES Commander for VAG provides you also full diagnostic capabilities for VAG-vehicles.

Highlights:
1. extracting security access codes (PIN) by OBDII
2. Programming keys by OBDII. Preparation of dealer's keys.
3. Mileage recalibration by OBDII
4. Clearing crash data DTCs by OBDII
5. Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6. Exchange speed limit of MMI-TV system
Standard diagnostic functions:
7. Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
8. For all electronic control units reading identification data
9. For all electronic control units read error (DTCs)
10. For all electronic control units clear error (DTCs)
11. Scan all units
12. Broadcast requests
13. Measured values
14. Adaptation

Special functions:
1 Instrument CAN
- With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
- You can read current odometer value
- You can change odometer value
- Added support for VDO Instrument Cluster 2006+
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Reading security code (PIN) and component protection by OBDII - VW CRAFTER
- Read/Write immobilizer related data

2 EZS - Kessy (Q7/A6/Allroad)
- With this function you can prepare dealer key/learn dealer key
- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)

3 Instrument K-Line
- With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
- You can Read/Change odometer value
- Read PIN code
- Read/Write eeprom
- Read ROM/Flash from the Instrument cluster

4 Engine Control Unit
- Read EDC17/MED17 flash memory
- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flash memory via OBDII (K and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
- Read/Write flash counters (EDC16)
- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Samos PPD)
- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Samos PPD)
- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
- Odometer correction (EDC15, EDC16)

5 Kissy adaptations

- This function can be used for adaptation of brand new kissy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.

6 TV activation ED1/ED2
- Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF

7 Key learning
- With this function you can learn key/transponder to the vehicle

8 Dump tools
- With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit

9 Airbag
- With this special function you can Read/Write EEPROM memory of the airbag module
- Clear the crash data of the airbag module

10 Custom Read/Write
- Using this application you can read/program memory in some electronic control unit
 PIN Convertor
Service interval
- Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
11 Remote control adaptation
- Using this application, you can learn remote controls
12 Navigation
- Using this application, you can enable/disable the “Eject” button of the “Navigation” system
13 Cruise control system
- Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available
14 Brake pads change
- Using this application, you can “Open rear parking brake for pad change”, “Close rear parking
brake”, perform “Parking brake function test”

MAIN SCREEN

Update steps:

1. Launch COMMANDER UPDATE 1.3 software, click [read SN] button to read serial number (about 1 minute to get the S/N).
2. Send us the S/N, we will supply the latest firmware and software to you.
3. Launch COMMANDER UPDATE 1.3 software, click [read SN] button to read serial number, then click [UPDATE] button to select the latest firmware, and click “Yes” to start updating.
4. After you get it updated, it will give “update ok” attention.

--- If you have any question or want to place order, please contact us and remark the name of product.